Current location:Home > commercial car wash systems >

commercial car wash systems

.
...
.<a href=https://www.dycarwasher.com/products><strong style=font-size:28px></strong></a>
2025-08-14 14:44
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Latest articles

    One of the most compelling advantages of water jet car washes is their ability to deliver a thorough cleaning while minimizing damage to a vehicle's exterior. Traditional car washes often use abrasive brushes that can scratch paint and create swirl marks, compromising the vehicle's finish over time. In contrast, water jet technology uses focused streams of pressurized water to lift dirt without physical contact, ensuring that your car looks immaculate without the risk of scratches or damage.


    water jet car wash

    water

    Traditional car wash methods often rely on large amounts of water, detergents, and various chemicals, which can contribute to environmental pollution and waste. In contrast, dry steam car wash machines utilize high-temperature steam to clean vehicles, requiring minimal water and fewer harmful substances. This method is particularly appealing to environmentally conscious consumers, as it effectively reduces water waste and the use of toxic cleaning agents. The steam penetrates and loosens dirt, grime, and grease, allowing for a thorough cleaning without damaging the car’s surface.



    (1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
    (2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
    (4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
    (5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
    (6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank