Current location:Home > automatic car washer >

automatic car washer

2025-08-16 01:58
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Latest articles

    One of the most significant benefits of lift car wash services is the speed at which they operate. Many traditional car washes require extensive drying and detailing processes, which can take up to an hour or more. In contrast, lift car washes can often complete the job in as little as 10 to 20 minutes, allowing drivers to get back on the road quickly. This efficiency appeals particularly to busy professionals, parents, and anyone who values their time.


    lift car wash

    lift

    Self-service car wash machines are an innovative way to provide car cleaning services. These machines are typically found in dedicated wash facilities and allow car owners to take control of the cleaning process. With a variety of functions including high-pressure water sprays, foam brushes, and rinse cycles, these machines provide a comprehensive wash solution tailored to individual needs.


    Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
    Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A>1.5R)
    Hose bending radius is bigger when it is in motion.
    Choose proper fittings, avoid twisting in hose lines bent in two planes.
    Avoid twisting in hose by use clamp properly.
    Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
    Leave proper length when the hose in connected
    Choose proper fittings, avoid too small bending radius and excess force.
    Choose proper fittings, avoid excessive hose length.
    Reuse friction, avoid hose touching the object directly or far away from the object.
    Hose Active Working Pressure Working Life
    As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
    Store Conditions of the Assembly.
    1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
    2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
    3.Can not be placed with erosive products or exposed over gas-volatile on these products.
    4.Far away from heat source and equipment which can produce electric field or magnetic field
    5.Avoid sunshine or strong artificial light source
    6.Avoid to touch the sharp objects or the ground
    7.Guarantee against rodent attacking.
    8.Observe the rule of “First in, then first out”